Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 176)

3.22 Result silo
164
PC Control / Touch Control
3.22.1 Properties of the result silo
Under Result silo/Properties you can choose the criteria according
to which the list is to be sorted and the data to be shown for each
determination.
Open the dialog with [Properties].
Select the Contents of Column 1 and Column 2. In Column 1 you
can display the sample data (Identification 1 or 2, or sample size),
determination time, method, the name of the result or the user. In
Column 2 you can select the result to be shown. The numbering of
the results corresponds to the order in which the results have been
calculated in the determination sequence and stored in the result
silo. The numbering does not correspond to the result variable to
which the result has been assigned.
Use Sort by to select the criterion according to which you want to
sort the content of the list. The entries can be sorted in ascending
or descending order.
The maximum number of lines in the result silo can be defined
under Max. number of lines. If a result silo containing more lines
than defined here is imported (loading or backup), the maximum
number of lines is increased to that value.
With [Delete automatically], you define when the contents of the
result silo is deleted automatically. You can set it so that the oldest silo
line will be deleted when the result silo is full and a new determination is
to be entered. All lines can be deleted automatically when the titration
system is switched on, when a new sample series is started with the
autostart function switched on or when the result silo is saved.
You can use filters for the display of the result silo table. A filter is a rule
defining what is to be shown.
Open the dialog for selecting the filter criteria under Result
silo/Properties with [Filter].