Metrohm 840 PC Control 5.0 / Touch Control User Manual
Page 177
Advertising
3
Operation
PC Control / Touch Control
165
Select a filter criterion under Filter and enter the corresponding text or
the time range or the range of values in the lines below. The filter can
be applied to empty fields as well, for example, if no sample
identification has been entered. In this case, select only the desired
filter criterion and leave the fields below empty. Only one filter criterion
can be active at a time. Only those determinations which meet the filter
criterion will be shown in the result silo:
The fact that a filter is active is indicated by the filter symbol in the top
right-hand corner.
Advertising