Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 128)

3.16 Editing parameters
116
PC Control / Touch Control
3.16.3 Method options
Method options are settings which apply to the method as a whole and
not to an individual command. For example, you can switch Statistics
on and off, Show direct parameters on and off, automatically save
the determination at the end of the run, sign a method, enter a
Note and make the settings for sample data input.
Open the dialog Sequence/Method options.
[Properties] accesses an overview of the properties of the current
method. If you are not working with login and password or if the method
has never been saved then the buttons [Delete signature] and
[Sign] will be inactive. The button [Delete signature] is inactive for
as long as the method has not been signed at level 2. If the method has
been signed three times at level 2 then the only active button is [Delete
signatures].
[Sign] accesses the dialog for signing methods.
• Signature: Selects the level at which the method should be signed.
If the method has never been signed then only level 1 can be
selected. If the method has been signed three times at level 1 or
already once at level 2 then only level 2 can be selected. A
maximum of three signatures from up to three different users can
given at each level. However, it is not possible for a user to sign at
both level 1 and level 2.