Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 31)

3 Operation
PC Control / Touch Control
19
3.5 Login
Depending on how your Titrando system is configured, you may have
to use the User login function before you can work with the system.
User administration is carried out by a user with administrator rights
(see Section 3.7.5 to Section 3.7.7). There are two different ways of
identifying the user: by the entry of the user name or by using an
identification card, on which the user name and the routine dialog
settings are stored. If a password is required for identification then this
will be requested on login in both cases.
In the following example the user must identify himself/herself by
entering a name and password.
The first time that you log in you must first define your password with
[Change password]:
First enter the password under New password and enter it again
under Confirm password for confirmation. Please note that this
password can not be used multiple times.
Enter your password in the login dialog. If the user is defined in the
list of users and if the correct password has been entered then the
main dialog will open.
If you have to identify yourself with an identification card then you will be
requested to insert it.