Altera Arria 10 Avalon-MM - Manual (Page 181)

Location altpcietb_bfm_driver_rp.v
Arguments
bar_table Address of the Endpoint bar_table structure in BFM shared
memory.
bar_num BAR number to analyze.
log2_size This argument is set by the procedure to the log base 2 of the
size of the BAR. If the BAR is not enabled, this argument will
be set to 0.
is_mem The procedure sets this argument to indicate if the BAR is a
memory space BAR (1) or I/O Space BAR (0).
is_pref The procedure sets this argument to indicate if the BAR is a
prefetchable BAR (1) or non-prefetchable BAR (0).
is_64b The procedure sets this argument to indicate if the BAR is a 64-
bit BAR (1) or 32-bit BAR (0). This is set to 1 only for the lower
numbered BAR of the pair.
BFM Shared Memory Access Procedures
The BFM shared memory access procedures and functions are in the Verilog HDL include file
altpcietb_bfm_driver.v. These procedures and functions support accessing the BFM shared memory.
Shared Memory Constants
The following constants are defined in altpcietb_bfm_driver.v. They select a data pattern in the
shmem_fill
and
shmem_chk_ok
routines. These shared memory constants are all Verilog HDL type
integer
.
Table 14-11: Constants: Verilog HDL Type INTEGER
Constant Description
SHMEM_FILL_ZEROS Specifies a data pattern of all zeros
SHMEM_FILL_BYTE_INC Specifies a data pattern of incrementing 8-bit bytes (0x00, 0x01,
0x02, etc.)
SHMEM_FILL_WORD_INC Specifies a data pattern of incrementing 16-bit words (0x0000,
0x0001, 0x0002, etc.)
SHMEM_FILL_DWORD_INC Specifies a data pattern of incrementing 32-bit dwords
(0x00000000, 0x00000001, 0x00000002, etc.)
UG-01145_avmm
2015.05.14
BFM Shared Memory Access Procedures 14-31
Avalon-MM Testbench and Design Example Altera Corporation
Send Feedback