Altera Arria 10 Avalon-MM - Manual (Page 64)

Signal Direction Description
sim_pipe_
ltssmstate0[4:0]
Input and
Output
LTSSM state: The LTSSM state machine encoding defines the
following states:
• 5’b00000: Detect.Quiet
• 5’b 00001: Detect.Active
• 5’b00010: Polling.Active
• 5’b 00011: Polling.Compliance
• 5’b 00100: Polling.Configuration
• 5’b00101: Polling.Speed
• 5’b00110: config.LinkwidthsStart
• 5’b 00111: Config.Linkaccept
• 5’b 01000: Config.Lanenumaccept
• 5’b01001: Config.Lanenumwait
• 5’b01010: Config.Complete
• 5’b 01011: Config.Idle
• 5’b01100: Recovery.Rcvlock
• 5’b01101: Recovery.Rcvconfig
• 5’b01110: Recovery.Idle
• 5’b 01111: L0
• 5’b10000: Disable
• 5’b10001: Loopback.Entry
• 5’b10010: Loopback.Active
• 5’b10011: Loopback.Exit
• 5’b10100: Hot.Reset
• 5’b10101: L0s
• 5’b11001: L2.transmit.Wake
• 5’b11010: Speed.Recovery
• 5’b11011: Recovery.Equalization, Phase 0
• 5’b11100: Recovery.Equalization, Phase 1
• 5’b11101: Recovery.Equalization, Phase 2
• 5’b11110: Recovery.Equalization, Phase 3
• 5’b11111: Recovery.Equalization, Done
rxfreqlocked0
(1)
Input When asserted indicates that the
pclk_in
used for PIPE
simulation is valid.
rxdataskip0
Output For Gen3 operation. Allows the PCS to instruct the RX interface
to ignore the RX data interface for one clock cycle. The following
encodings are defined:
• 1’b0: RX data is invalid
• 1’b1: RX data is valid
UG-01145_avmm
2015.05.14
PIPE Interface Signals 5-17
64- or 128-Bit Avalon-MM Interface to the Application Layer Altera Corporation
Send Feedback