Altera Arria 10 Avalon-MM - Manual (Page 20)

• Creating a System with Qsys
This document provides an introduction to Qsys.
Running Qsys
1. Choose Programs > Altera > Quartus II><version_number> (Windows Start menu) to run the
Quartus II software. Alternatively, you can also use the Quartus II Web Edition software.
2. On the File menu, select New, then Qsys System File.
3. Open the ep_g2x4_avmm128.qsys example design.
The following figure shows a Qsys system that includes the Transceiver Reconfiguration Controller and
the Altera PCIe Reconfig Driver IP Cores. The Transceiver Reconfiguration Controller performs dynamic
reconfiguration of the analog transceiver settings to optimize signal quality. You must include these
components to the Qsys system to run successfully in hardware.
Figure 2-2: Qsys Avalon-MM Design for PCIe with Transceiver Reconfiguration Components
Refer to Creating a System with Qsys in volume 1 of the Quartus II Handbook for more information about
how to use Qsys. For an explanation of each Qsys menu item, refer to About Qsys in Quartus II Help.
Related Information
• Creating a System with Qsys
• About Qsys
2-2 Running Qsys
UG-01145_avmm
2015.05.14
Altera Corporation Getting Started with the Avalon‑MM Arria 10 Hard IP for PCI Express
Send Feedback