C. additional information, Revision history for the avalon-mm interface, Additional information – Altera Arria 10 Avalon-MM User Manual
Page 207
Additional Information
C
2015.05.14
UG-01145_avmm
Revision History for the Avalon-MM Interface
Date
Version
Changes Made
2015.05.14
15.0
Made the following changes to the user guide:
• Added Enable Hard IP Status Bus when using the AVMM
interface parameter in
This parameter is available in the IP core v15.0 and later.
2015.05.04
15.0
Made the following changes to the user guide:
• Enhanced the descriptions in
• Added Enable Altera Debug Master Endpoint (ADME)
parameter to support optional Native PHY register programming
with the Altera System Console.
• Added support to send message TLPs with data payload of any
length from a Root Port. Refer to
on page 6-26 and to the new supported
TLP entry for Avalon-MM variations in the Feature Comparison
for all Hard IP for PCI Express IP Cores table in
.
• Added information about the new custom example designs, in
on page 1-9.
• Added column for Avalon-ST Interface with SR-IOV variations in
Feature Comparison for all Hard IP for PCI Express IP Cores
section.
• Enhanced descriptions of channel placement, added fPLL
placement for Gen1 and Gen2 data rates, and added master CGB
location, in
Physical Layout of Hard IP In Arria 10 Devices
on
page 4-1.
• Updated DUT module name in testbench and example design
figures.
©
2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are
trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
www.altera.com/common/legal.html
. Altera warrants performance
of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,
product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device
specifications before relying on any published information and before placing orders for products or services.
www.altera.com
101 Innovation Drive, San Jose, CA 95134