Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 100)

Publication 1757-IN500A-EN-P - September 2002
4-12 ProcessLogix Server Upgrade Procedures
a. On SERVERA, enter this command:
>xcopy C:\Data\*.* T:\R320PrimaryData\ /E<
and press <Enter>.
b. If necessary, enter >D< to specify that R320PrimaryData is a
directory.
c. Wait until the C:\ prompt appears and close the DOS window.
d. On SERVERB, enter this command:
>xcopy C:\Data\*.* T:\R320BackupData\ /E<
and press <Enter>.
e. If necessary, enter >D< to specify that R320BackupData is a
directory.
f. Wait until the C:\ prompt appears and close the DOS window.