Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 40)

Publication 1757-IN500A-EN-P - September 2002
2-16 Operating System Installation Procedures
9. Enter the appropriate Name and Organization name and click Next.
10. Enter your Windows 2000 Professional Product Key and click Next.
11. At the Computer Name and Administrator Password window:
a. Enter the Computer Name.
b. Enter the Administrator password.
c. Confirm the password.
d. Click Next.
12. At the Date and Time Settings window:
a. If necessary, adjust the Date and Time settings.
d. Set the appropriate Time Zone for your location.
e. Uncheck the Automatically adjust clock for daylight saving changes
option.
f. Click Next.
If setup has not found a suitable Network Device, you will be prompted
for installing one. Follow the instructions for adding a manufacturer
supplied driver or add the Microsoft Loop Back adapter.
13. Choose the Custom settings option and click Next.
IMPORTANT
The computer name cannot contain more than 14
alphanumeric characters and must contain no spaces. For a
ProcessLogix Client, be sure the name does not end in the
letter “A” or “B”. The suggested name is STNxx, where xx
is the Station Number (01-20).
IMPORTANT
Be sure to document the Administrator Password. (It is
required later in the procedure.) The Administrator
Account and password gives a user full access to the
system. Care should be taken to who has access to this
information.
ATTENTION
!
Failure to uncheck the Automatic adjustment for Daylight
Savings Time will cause Redundant Systems to loose
“Sync” when the time is automatically adjusted. Choosing
not to automatically adjust the time allows you to decide
when to make the adjustment (at a time that is not critical
to your process).