Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 210)

Publication 1757-IN500A-EN-P - September 2002
8-12 Supplementary Procedures
14. Repeat Steps 12 and 13 for other remote chassis by selecting the next
numbered tab, as required.
15. When settings are complete, click OK.
Look for the graphic of the chassis for given CNB to appear in the
Detail pane. The graphic will also show remote chassis, if applicable.
16. Repeat Step 8 to Step 15 for next CNB or Ethernet driver icon, as
required.
17. Close NTools when finished.