Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 180)

Publication 1757-IN500A-EN-P - September 2002
6-24 Additional Redundant Server Procedures
Backing Up a ProcessLogix Server Hard Drive to Tape
Performing backups is an essential part of maintaining your system. You
should back up all the files under the data directory, as well as any user files you
create. Refer to Backing Up a ProcessLogix Server Hard Drive to Tape on
page 6-24.
Creating an Emergency Repair Disk
After all installations and drivers are installed, you should now create your
Emergency Repair Disk. Use the following procedure to create an emergency
repair disk for your Windows 2000 Server installation.
1. Insert a blank diskette into the floppy drive.
2. Click Start
⇒
Programs
⇒
Accessories
⇒
System Tools
⇒
Backup.
3. Click Emergency Repair Disk.
An Emergency Repair Diskette window will appear.
4. Check the Also back up the registry to the repair directory checkbox and
click OK.
5. When finished, click OK.
6. Repeat Steps 1 through 5 with another blank formatted diskette.
7. Click Job
⇒
Exit.
8. Store the two diskettes in different places to protect against damage to
the diskettes.