Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 31)

Publication 1757-IN500A-EN-P - September 2002
Operating System Installation Procedures 2-7
10. Enter your Windows 2000 Server Product Key and click Next.
11. Choose your Server’s Licensing Mode:
Rockwell Automation recommends that you choose the “Per Seat”
licensing option.
12. At the Computer Name and Administrator Password window:
a. Enter the Computer Name.
IMPORTANT
Microsoft requires that you attain the appropriate number
of Client Access Licenses required for your system. For
ProcessLogix Systems, the total number of clients
includes other ProcessLogix Servers (Redundant Servers),
and ProcessLogix Clients.
When you purchase a ProcessLogix Client License, a
Client Access License for Windows 2000 Server in
included.
IMPORTANT
If you purchased a new ProcessLogix R500.1 Server from
Rockwell Automation, the operating system and
ProcessLogix software have already been installed. Do not
reinstall the software. Refer to the ProcessLogix R500.1
Server Installation Instructions, publication 1757-IN950
shipped with your hardware.
It is strongly recommended that you name your Server
properly prior to installing ProcessLogix R500.1 software.
To change the Server name prior to installing ProcessLogix
R500.1, follow the procedures in Changing the Computer
Name on a ProcessLogix Client on page 8-23.
Once the ProcessLogix R500.0 software is installed,
changing the computer name requires a full uninstall and
reinstall of all the ProcessLogix R500.1 software. Refer
to Changing the Computer Name on a ProcessLogix
Server on page 8-15.