Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 90)

Publication 1757-IN500A-EN-P - September 2002
4-2 ProcessLogix Server Upgrade Procedures
Upgrade R400.0 Server to R500.1
This section describes the steps necessary to upgrade the ProcessLogix R400.0
Server software to R500.0. There are two upgrade options.
Upgrading R400.0 Server to R500.1: Option 1
a. Backup your data.
b. Uninstall your current ProcessLogix software.
c. Install ProcessLogix R500.1.
d. Restore your data.
The following table lists the items in Option 1 that you MUST complete to
upgrade an R400.0 Server to an R500.1 Server.
Upgrading R400.0 Server to R500.1: Option 2
a. Backup your data.
b. Perform a clean install.
c. Restore your data.
The following table lists the items in Option 2 that you MUST complete to
upgrade an R400.0 Server to an R500.1 Server.
IMPORTANT
Due to the nature of this upgrade, it is recommended that
you follow Option 2 (Clean install) when upgrading from
R400.0 to R500.1.
Table 4.B Upgrading R400.0 Server to R500.1 Option 1 Checklist
✔
Step Item Page
1. Preparing for a ProcessLogix R400.0 to R500.1 Server
Upgrade 4-14
2. Saving R400.0 Data to a Remote PC 4-22
3. Removing ProcessLogix R400.0 Software 4-23
4. Installing ProcessLogix R500.1 Software 4-27
5. Finalizing R400.0 to R500.1 Upgrade 4-27
6. Restoring ProcessLogix Data 4-28
Table 4.C Upgrading R400.0 Server to R500.1 Option 2 Checklist
✔
Step Item Page
1. Preparing for a ProcessLogix R400.0 to R500.1 Server
Upgrade 4-14
2. Saving R400.0 Data to a Remote PC 4-22