Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 37)

Publication 1757-IN500A-EN-P - September 2002
Operating System Installation Procedures 2-13
You will need:
• 4 blank 3.5” 1.44 Mb (High Density) Floppy Disks
• 1.44 MB Floppy Drive
• CD-ROM Drive
• DOS or Windows based Operating System with access to CD-ROM
and floppy devices.
1. Insert the Windows 2000 Professional CD into the CD-ROM drive.
2. Click Start
⇒
Run.
3. Enter this command:
>cmd<
and click OK to open the DOS window.
4. At the DOS prompt, enter: >D:< and press <Enter>.
5. Enter this command:
>cd bootdisk<
and press <Enter>.
6. Enter this command:
>makeboot<
and press <Enter>.
7. Enter the letter of your floppy disk drive. >A<
8. Follow the on-screen prompts for inserting, labeling, and creating the
four floppy disks.
9. Be sure to label your floppy disks.
10. When all the boot floppies have been made, shut down the PC.
IMPORTANT
Server Boot floppies and Professional Boot floppies are
different.