Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide User Manual
Page 154
Publication 1757-IN500A-EN-P - September 2002
5-30 ProcessLogix Client Installation and Upgrade Procedures
PLX1A is the default Server name assigned by the factory. It is used
for example purposes only.
b. Select the appropriate Station type option, Static Station or Rotary
Station.
c. Click Advanced.
d. Enter >3< as the Static Station Number or enter appropriate update
rates and startup display number for Rotary.
e. Check the Auxiliary setup file checkbox.
f. Click Browse and navigate to
C:\Honeywell\Client\Station\defaultb.stn and click Open.
17. On the Displays tab:
a. Check the Search subdirectories for shapes checkbox.
b. If necessary, select C:\honeywell\client\system\r400 and click
Remove.
c. Click Add and then Browse and add the following directories.
• C:\honeywell\client\system\r500
• C:\honeywell\client\abstract
IMPORTANT
You must indicate the full path to the .stn file.