Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 53)

Publication 1757-IN500A-EN-P - September 2002
Operating System Installation Procedures 2-29
Installing Windows 2000 Service Pack 2
1. Logon to the system as Administrator.
2. Insert the ProcessLogix R500.1 Supplemental Software CD into the
CD-ROM drive.
3. Click Start
⇒
Run.
4. Enter this path or Browse to:
>D:(or your CD-ROM drive letter)\win2k_sp\w2ksp2.exe<
5. Click OK to launch the Service Pack 2 setup application.
6. At the Windows 2000 Service Pack Setup window, check the boxes:
• Accept the License Agreement.
• Backup files necessary to uninstall this Service Pack at a later time.
7. Click Install to initiate the Service Pack 2 update.
8. At the Setup Complete window, close any open applications and click
Restart.
9. Continue the installation with Windows 2000 Security Rollup
Installation on page 2-30.
TIP
If this is the first time start since the Windows 2000
operating system install, it will be necessary to remove the
default startup screens. Refer to Removing the Default
Startup Screens on page P-4.