Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 5)

Publication 1757-IN500A-EN-P - September 2002
Table of Contents iii
Determining the Current RSLinx Version . . . . . . . . . . . . . . . . . 3-13
Installing the Activation File . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Configuring RSLinx Drivers for ControlNet Supervisory Network 3-15
Updating the 1784-PCIC Firmware . . . . . . . . . . . . . . . . . . . . . . 3-17
Starting Network Tools Application . . . . . . . . . . . . . . . . . . 3-17
Updating the 1784-PCIC Firmware . . . . . . . . . . . . . . . . . . . 3-17
Configuring RSLinx Drivers for Ethernet
Supervisory Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-19
Completing the ProcessLogix R500.1 Install on a
Redundant Server Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20
Completing the ProcessLogix R500.1 Install on a
Non-Redundant Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20
Upgrading Hardware Component Firmware . . . . . . . . . . . . . . . 3-20
Checking Control Builder Operation and Logging On . . . . . . . 3-20
Changing the default Operator's password . . . . . . . . . . . . . 3-20
Backing Up a ProcessLogix Server Hard Drive to Tape . . . . . . 3-21
Creating an Emergency Repair Disk. . . . . . . . . . . . . . . . . . . . . . 3-21
Chapter 4
ProcessLogix Server Upgrade
Procedures ProcessLogix Server Upgrade Scenarios . . . . . . . . . . . . . . . . . . . . . . . 4-1
Upgrade R320.0 Server to R500.1. . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Upgrade R400.0 Server to R500.1. . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Upgrading R400.0 Server to R500.1: Option 1 . . . . . . . . . . . 4-2
Upgrading R400.0 Server to R500.1: Option 2 . . . . . . . . . . . 4-2
Preparing for a ProcessLogix R320.0 to R500.1 Server Upgrade . . . 4-3
Backing Up a ProcessLogix R320.0 Server to Tape. . . . . . . . . . . 4-3
Exporting the R320.0 Engineering Repository Database . . . . . . 4-4
Stopping the ER Replicator Service . . . . . . . . . . . . . . . . . . . 4-4
Exporting the Database Using Control Builder . . . . . . . . . . 4-4
Saving Important R320.0 Server Data . . . . . . . . . . . . . . . . . . . . . 4-6
Exporting the ProcessLogix Server Database . . . . . . . . . . . . . . . 4-8
Removing the RSLinx Software Activation File. . . . . . . . . . . . . . 4-9
Copying R320.0 Data to the R500.1 Server . . . . . . . . . . . . . . . . . . . 4-10
Networking the R320.0 and R500.1 Servers. . . . . . . . . . . . . . . . 4-10
Transferring R320.0 Data to the R500.1 Server . . . . . . . . . . . . . 4-11
Transferring the 1784-PCIC Card to the R500.1 System. . . . . . . . . 4-13
Preparing for a ProcessLogix R400.0 to R500.1 Server Upgrade . . 4-14
Exporting the R400.0 Engineering Repository Database . . . . . 4-14
Disabling ERDB Replication . . . . . . . . . . . . . . . . . . . . . . . . 4-15
Exporting the Database Using Control Builder . . . . . . . . . 4-15
Saving Fieldbus Device Definition Files. . . . . . . . . . . . . . . . . . . 4-16
Saving Important R400.0 Server Data . . . . . . . . . . . . . . . . . . . . 4-18
Exporting the R400.0 ProcessLogix Server Database . . . . . . . . 4-20
Removing the RSLinx Software Activation File. . . . . . . . . . . . . 4-21