Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 28)

Publication 1757-IN500A-EN-P - September 2002
2-4 Operating System Installation Procedures
4. At the DOS prompt, enter the CD-ROM drive letter:
>D:<
and press <Enter>.
5. Enter this command:
>cd bootdisk<
and press <Enter>.
6. Enter this command:
>makeboot<
and press <Enter>.
7. Enter floppy disk drive letter: >A<.
8. Follow the on-screen prompts for inserting, labeling, and creating the
four floppy disks.
9. Be sure to label your floppy disks.
10. When all the boot floppies have been made, shut down the PC.
Starting the Windows 2000 Server Installation from the Boot
Floppies
1. With the PCs’ power off, insert the diskette titled Windows 2000 Setup
Boot Disk into the floppy disk drive.
2. Turn on the PC.
3. Insert the Microsoft Windows 2000 Server CD into the CD-ROM drive.
4. Follow the on-screen prompts to remove and insert the Windows 2000
Server Setup Disks 2, 3, and 4 when instructed to do so.
IMPORTANT
Server Boot floppies and Professional Boot floppies are
different.