Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 133)

Publication 1757-IN500A-EN-P - September 2002
ProcessLogix Client Installation and Upgrade Procedures 5-9
Upgrade R320.0 Windows NT 4.0 Client to R500.1 Windows 2000
XP Client (Clean Install)
The following table lists the items that you must complete to upgrade an
R320.0 Windows NT 4.0 Client to an R500.1 Windows XP Professional
Client.
IMPORTANT
Due to significant changes in the ProcessLogix software,
operating system, and performance requirements,
migration from a ProcessLogix R320.0 Client to a
ProcessLogix R500.1 Client requires that you backup your
R320.0 data and then perform a clean ProcessLogix R500.1
Client installation. Refer to Table 11.B to confirm that your
PC meets the platform requirements for a ProcessLogix
R500.1 Client.
Table 5.H Upgrade R320.0 Windows NT 4.0 Client to R500.1 Windows 2000 XP Client
(Clean Install) Checklist
✔
Step Task to Complete: Refer to:
1 Saving Important Data 5-10
2 Networking an R320.0 Client to a Remote PC 5-11
3 Clean System Windows XP Professional Installation 2-19
4 Internet Explorer 6.0 Security Update Installation 2-34
5 Additional Operating System Customization Procedures 2-37
6 Creating the ProcessLogix User Accounts 2-41
7 Installing ProcessLogix R500.1 Client Software 5-14
8 Restoring ProcessLogix Data 5-23