Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide User Manual
Page 166
Advertising
Publication 1757-IN500A-EN-P - September 2002
6-10 Additional Redundant Server Procedures
3. At the DOS prompt, key in this command:
>dual_status<
and press <Enter>.
4. The unsynchronized SERVERA data should be similar to this:
5. Verify that the data link is available.
6. On SERVERB, click
Start
⇒
Run.
7. Enter this command in the Open entry field:
>cmd<
and click OK to open the DOS window.
8. At the DOS prompt, key in this command:
>dual_status<
and press <Enter>.
9. The unsynchronized SERVERB data should be similar to this:
10. Verify that the data link is available.
Advertising