Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 192)

Publication 1757-IN500A-EN-P - September 2002
7-12 Firmware Maintenance Procedures
11. Wait for the load to complete and the 1757-PLX52, TC-MUX021, or
1757-FIM module to reboot to its ALIVE status as shown in the
module LED display. The Status field in the lower portion of the
Network Tools window tracks the load progress.
12. Click OK to acknowledge the load completion with no errors.
13. Confirm that the LED display on the 1757-PLX52 or TC-MUX021
module shows ALIVE.
Loading Personality Image
1. With the 1757-PLX52, TC-MUX021, or 1757-FIM module in its
ALIVE state, click the 1757-PLX52, TC-MUX021, or 1757-FIM
module in the Detail pane.
2. Click Firmware to initiate the firmware update.
3. Click Yes to acknowledge the Warning prompt.
4. To load the personality image to a 1757-PLX52, locate the cee50.pcm
personality (rex) file. See Table 7.A on page 7-5.
5. To load the personality image to a TC-MUX021, locate the simrex.pcm
personality (rex) file. See Table 7.A on page 7-5.
TIP
You should load the cee5.pcm file for CEE-5ms.