Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 182)

Publication 1757-IN500A-EN-P - September 2002
7-2 Firmware Maintenance Procedures
14. Click Next to install the driver.
15. If a Digital Signature Not Found window appears, click Yes.
16. If necessary, click Yes to overwrite the VirtualBackplane.sys file.
17. If necessary, click Yes to overwrite the ABPCICSW.sys file.
18. Click Finish.
Verify the 1784-PCIC Driver Version
1. Right-click the My Computer icon and select Manage.
2. Select Device Manager.
3. If the A-B Virtual Backplane icon exists, expand A-B Virtual Backplane.
4. Double-click A-B 1784-PCIC(S).
5. If AB 1784-PCIC(S) is not present, you need to install the Hardware
Device Drivers. Restart the PC and refer to Install Hardware Device
Drivers on page 7-1.
6. On the Driver Tab click Driver Details.
7. Select ABPCICW.sys
The ABPCICSW.sys file version should be 3.6.18 WDM
8. Select Virtual Backplane.sys.
The VirtualBackplane.sys file version should be 1.9.
9. Click OK to close the Driver File Details window.
10. Click OK to close the AB 1784-PCIC(S) Properties window.
11. Close the Computer Management window.