Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 41)

Publication 1757-IN500A-EN-P - September 2002
Operating System Installation Procedures 2-17
14. At the Networking Components window, select Internet Protocol
(TCP/IP) and click Properties.
15. In the Networking Components Window,
a. Click the Use the following IP address option.
b. Enter the appropriate IP address information.
The following Private Networking IP Address scheme can be utilized
for the system to operate:
c. Enter the Subnet Mask of 255.255.255.0.
d. Enter a default gateway, if necessary.
Table 2.B Private Networking IP Address scheme
PC Type Suggested Private Networking IP Address
Client NIC 1: 192.168.0.x
NIC 2: 192.168.1.x
where x is the Station number +2 (for Station number 2, x=4)