Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 42)

Publication 1757-IN500A-EN-P - September 2002
2-18 Operating System Installation Procedures
e. Click OK to return to the Networking Components window.
16. Click Next.
17. Repeat step 16 for additional network cards.
18. At the Workgroup or Computer Domain window:
a. Choose the No, this computer …. option.
b. Enter an appropriate WorkGroup Name.
c. Click Next.
IMPORTANT
IP Addresses are critical to the communication of the
system. Rockwell Automation suggests, when possible, to
utilize a Private Network for the control system. (Not
connected to any other networks.) This isolates the
control system from interference from any business
communication.
In some organizations it is important for these addresses
to be controlled by the IT organization. Consult your
company’s practices and IT organization for the
appropriate IP address information. It will be necessary to
use valid IP information to integrate the ProcessLogix
Control system with the Business Network.