Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 216)

Publication 1757-IN500A-EN-P - September 2002
8-18 Supplementary Procedures
Removing Selected ProcessLogix R500.1 Components
1. Logon to the system as ps_user.
2. Click Start
⇒
Settings
⇒
Control Panel.
3. Double-click Add/Remove Programs.
4. To remove a program:
a. Click on the appropriate program in the list of installed programs.
b. Click Add/Remove, Change/Remove or Remove.
c. Click Yes to confirm removal.
d. Repeat the steps for each component in the following order.
IMPORTANT
If at any time during software uninstall, a remove shared
file prompt appears, click Yes to all or Remove.
If necessary, click OK or Yes to confirm.
IMPORTANT
Be sure to remove the components in the order they are
listed below.
Table 8.C Removal of Selected ProcessLogix R500.1 Components
✔
Order Component
1. Process Detail Displays
2. ProcessLogix Update
3. Control Component Library
4. PsAxCtl Document EXE (If you see an application
Removal window, click OK.)
5. Psc Engineering Tools
6. RSLinx
7. KB Server-Knowledge Builder Tools 4
8. KB Server-ProcessLogix R500
9. KB Client