Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 141)

Publication 1757-IN500A-EN-P - September 2002
ProcessLogix Client Installation and Upgrade Procedures 5-17
Installing Engineering Tools
This procedure is required for an Engineering Workstation only. If you are
Installing an Operating Workstation, skip to Installing the ProcessLogix Client
Software on page 5-17.
1. At the Ready to Install window, click Install.
2. At the Installation Complete window, click Finish.
Installing PsAxCtl Document EXE
This procedure is required for an Engineering Workstation only. If you are
instating an Operating Workstation, skip to Installing the ProcessLogix Client
Software on page 5-17.
1. Click OK to acknowledge the change directory warning.
2. At the PsAxCtl Document EXE Setup Welcome window, click OK.
3. Verify that the destination directory is
C:\Honeywell\TPS50\System\bin.
4. Click the large install button (PC icon).
5. At the Setup complete window, click OK.
Installing the ProcessLogix Client Software
1. At the Welcome to ProcessLogix Server Setup window, click Next.
TIP
Command windows will appear during Engineering Tools
install. These windows will close automatically.