Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 46)

Publication 1757-IN500A-EN-P - September 2002
2-22 Operating System Installation Procedures
7. Format the partition using the NTFS file system.
Setup will format the partition. This takes a few minutes to complete.
The computer will automatically reboot. Be sure to remove floppy disk
from the floppy disk drive.
8. Verify the information on the Regional and Language options windows
and click Next.
9. Enter the appropriate Name and Organization and click Next.
10. Enter your Windows XP Professional Product Key and click Next.
11. At the Computer Name and Administrator Password window:
a. Enter the Computer Name.
b. Enter the Administrator password.
c. Confirm the password.
d. Click Next.
12. At the Date and Time Settings window:
a. If necessary, adjust the Date and Time settings.
b. Set the appropriate Time Zone for your location.
c. Uncheck the Automatically adjust clock for daylight saving changes
option.
IMPORTANT
The computer name cannot contain more than 14
alphanumeric characters and must contain no spaces. For a
ProcessLogix Client, be sure the name does not end in the
letter “A” or “B”. The suggested name is STNxx, where xx
is the Station Number (01-20).
IMPORTANT
Be sure to document the Administrator Password. (It is
required later in the procedure.) The Administrator
Account and password gives a user full access to the
system. Care should be taken to who has access to this
information.