Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide User Manual
Page 149
Publication 1757-IN500A-EN-P - September 2002
ProcessLogix Client Installation and Upgrade Procedures 5-25
6. On the Connection tab, make these entries:
a. Enter the name or IP address of the non-redundant Server (PLX1) in
the Server field.
PLX1 is the default Server name assigned by the factory. It is used
for example purposes only.
b. Select the appropriate station type option, Static Station or Rotary
Station.
c. Click Advanced.
d. Enter >2< as the Static Station Number or enter the appropriate
update rates and startup display number for Rotary.
7. On the Displays tab:
a. Check the Search subdirectories for shapes checkbox.
b. If necessary, select C:\honeywell\client\system\r400 and click
Remove.
c. Click Add and then Browse and add the following directories.
• C:\honeywell\client\system\r500
• C:\honeywell\client\abstract