Transfer r400.0 data, Transfer r400.0 data -22 – Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide User Manual
Page 146
Advertising
Publication 1757-IN500A-EN-P - September 2002
5-22 ProcessLogix Client Installation and Upgrade Procedures
Transfer R400.0 Data
6. Click Start
⇒
Run.
7. Enter this command:
>cmd<
and click OK to open the DOS window.
8. Enter this command:
xcopy T:\R400Data\*.* C:\R400Data /E
and press <Enter>.
9. If necessary, enter >D< to specify that R400Data is a directory.
10. Delete the backup files from the remote PC.
Advertising