Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 172)

Publication 1757-IN500A-EN-P - September 2002
6-16 Additional Redundant Server Procedures
c. Enter >2< as the Static Station Number and click Advanced.
d. Check the Auxiliary setup file checkbox.
e. Click Browse and navigate to:
C:\Honeywell\Client\Station\default.stn and click Open.
6. On the Displays tab:
a. Check the Search subdirectories for shapes checkbox.
b. Click Add and then Browse and add the following directories.
• C:\honeywell\client\system\r500
• C:\honeywell\client\abstract
IMPORTANT You must indicate the full path to the .stn file.