Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 132)

Publication 1757-IN500A-EN-P - September 2002
5-8 ProcessLogix Client Installation and Upgrade Procedures
Upgrade R400.0 Windows NT 4.0 Client to R500.1 Windows 2000
XP Client (Clean Install)
The following table lists the items that you must complete to upgrade an
R400.0 Windows NT 4.0 Client to an R500.1 Windows 2000 Professional
Client.
IMPORTANT
Due to significant changes in the ProcessLogix software,
operating system, and performance requirements,
migration from a ProcessLogix R400.0 Windows NT 4.0
Client to a ProcessLogix R500.1 Client requires that you
backup your R400.0 data and then perform a clean
ProcessLogix R500.1 Client installation. Refer to Table
11.B to confirm that your PC meets the platform
requirements for a ProcessLogix R500.1 Client.
Table 5.G Upgrade R400.0 Windows NT 4.0 Client to R500.1 Windows 2000 XP Client
(Clean Install) Checklist
✔
Order Task to Complete: Refer to:
1 Saving Important Data 5-10
2 Networking an R400.0 Client to a Remote PC 5-12
3 Clean System Windows XP Professional Installation 2-19
4 Internet Explorer 6.0 Security Update Installation 2-34
5 Additional Operating System Customization Procedures 2-37
6 Creating the ProcessLogix User Accounts 2-41
7 Installing ProcessLogix R500.1 Client Software 5-14
8 Restoring ProcessLogix Data 5-23