Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide User Manual
Page 78
Publication 1757-IN500A-EN-P - September 2002
3-12 ProcessLogix Server Installation Procedures
26. Wait until after the command windows have closed and file copying is
complete, then click the No, I will restart my computer later option and
click Finish.
ATTENTION
!
If you are installing ProcessLogix software on a redundant
Server pair:
1. Do not restart SERVERA.
2. Return to the beginning of Installing ProcessLogix
Software on a Clean PC on page 3-1 and repeat for
SERVERB.
3. Once you have completed these procedures for both
SERVERA and SERVERB, restart SERVERB.
4. Logon to SERVERB as ps_user.
5. When SERVERB is running, restart SERVERA and
logon as ps_user.
6. Continue with the next section.
If you are installing ProcessLogix software on a
non-redundant Server:
1. Restart the Server.
2. Logon as ps_user.
3. Continue with the appropriate installation section.