Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 111)

Publication 1757-IN500A-EN-P - September 2002
ProcessLogix Server Upgrade Procedures 4-23
a. On SERVERA, enter this command:
xcopy C:\Data\*.* T:\R400PrimaryData /E
and press <Enter>.
b. On SERVERB, enter this command:
xcopy C:\Data\*.* T:\R400BackupData /E
and press <Enter>.
Removing ProcessLogix
R400.0 Software This procedure will completely remove ProcessLogix software from your
system, including:
• SQL
• Knowledge Builder
• RSLinx
• Engineering Tools
• Server and/or Station
Removal of Selected ProcessLogix R400.0 Components
1. Logon to the system as ps_user.
2. Click Start
⇒
Settings
⇒
Control Panel.
3. Double-click Add/Remove Programs.
4. To remove a program:
ATTENTION
!
Before installing or uninstalling any software component,
you MUST exit all ProcessLogix application and stop all
ProcessLogix services. Refer to Stopping ProcessLogix
Applications and Services on page 8-1.
IMPORTANT
If at any time during software uninstall, a Remove shared
file prompt appears, click Yes to all or Remove all.
If necessary, click OK or Yes to confirm.