Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 204)

Publication 1757-IN500A-EN-P - September 2002
8-6 Supplementary Procedures
1. Right-click the My Computer icon and select Manage.
2. Expand Services and Applications.
3. Select Services.
4. Scroll down to the service MSSQLSERVER and verify that it has
started.
If the MSSQLSERVER service did not start, start it.
5. Scroll down to the service SQLSERVERAGENT and verify that it has
started.
If the SQLSERVERAGENT service did not start, start it.
6. Close the Computer Management window.
Cancelling a Software
Component Installation If a problem occurs during the installation routine, use this procedure to
cancel the installation of a component.
1. Press F3 to open the Exit Setup window.
2. Click Exit Setup.
3. Try to install the given component or all components again.
If you are still experiencing problems, Refer to Rockwell Automation
Technical Support on page Preface-5 for information on how to contact
us.