Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 113)

Publication 1757-IN500A-EN-P - September 2002
ProcessLogix Server Upgrade Procedures 4-25
Remove Remaining ProcessLogix R400.0 Components
1. If necessary, logon to the system as ps_user.
2. Click Start
⇒
Settings
⇒
Control Panel.
3. Double-click Add/Remove Programs.
4. To remove a program:
a. Click on the appropriate program in the list of installed programs.
b. Click Add/Remove, Change/Remove or Remove.
c. Click Yes to confirm removal.
d. Repeat the steps for each component in the following order.
IMPORTANT
If at any time during software uninstall, a Remove shared
file prompt appears, click Yes to all or Remove all.
If necessary, click OK or Yes to confirm.
IMPORTANT
Be sure to remove the components in the order they are
listed below.
Table 4.G Removal of Remaining R400.0 Components
✔
Order Component
1. Control Component Library
2. PsAxCtl Document EXE
3. Psc Engineering Tools
4. RSLinx
5. Knowledge Builder
6. Microsoft SQL Server 7.0
7. PLX System Installer