Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 152)

Publication 1757-IN500A-EN-P - September 2002
5-28 ProcessLogix Client Installation and Upgrade Procedures
b. Select the appropriate Station type option, Static Station or Rotary
Station.
c. Click Advanced.
d. Enter >3< as the Static Station Number or enter appropriate update
rates and startup display number for Rotary.
e. Check the Auxiliary setup file checkbox.
f. Click Browse and navigate to
C:\Honeywell\Client\Station\default.stn and click Open.
8. On the Displays tab:
a. Check the Search subdirectories for shapes checkbox.
b. If necessary, select C:\honeywell\client\system\r400 and click
Remove.
c. Click Add and then Browse and add the following directories.
• C:\honeywell\client\system\r500
• C:\honeywell\client\abstract
IMPORTANT You must indicate the full path to the .stn file.