Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 29)

Publication 1757-IN500A-EN-P - September 2002
Operating System Installation Procedures 2-5
5. Press <Enter> on the Welcome to Setup screen.
6. Continue with Completing the Windows 2000 Server Installation on
page 2-5.
Starting the Windows 2000 Server Installation from the CD-ROM
1. Turn of the PC.
2. Insert the Microsoft Windows 2000 Server CD into the CD-ROM drive.
3. When prompted, enter into the computer’s BIOS setup program.
4. Verify that the Boot Priority has the CD-ROM device listed first.
(Before the floppy or hard disk devices.)
5. Exit the BIOS and save the setting.
6. Press any key to boot from the CD-ROM.
7. Press <Enter> on the Welcome to Setup screen.
Completing the Windows 2000 Server Installation
1. If requested, insert the Windows 2000 Server CD into the CD-ROM
drive and press <Enter>.
2. Press <F8> to agree to the Windows 2000 Licensing Agreement.
IMPORTANT
If your installation requires additional Manufacturer’s
Drivers, press the F6 key during the boot process and
follow the on-screen instructions for adding the necessary
drivers.
IMPORTANT
If your installation requires additional Manufacturer’s
Drivers, press the F6 key during the boot process and
follow the on-screen instructions for adding the necessary
drivers.