Rockwell Automation 1757-SWKIT5000 ProcessLogix R500.1 Installation and Upgrade Guide - Manual (Page 142)

Publication 1757-IN500A-EN-P - September 2002
5-18 ProcessLogix Client Installation and Upgrade Procedures
2. At the Choose Setup Type window, click ProcessLogix Client Software
setup (laptop icon).
3. At the Choose ProcessLogix Client Software window, check the
appropriate checkboxes for your application. Click the box to check or
uncheck it, or click Select All.
• Station
• HMIWeb Display Builder
• Display Builder
• Quick Builder
• Microsoft Excel Data Exchange
Uncheck this selection if Microsoft Excel is not currently installed on
this PC.
• Network API for Windows
• ODBC Client
• Standard Displays
• System Shapes
• OPC Server Connect
4. Click Next.
5. Click Next to accept the default directory for the Client Software.
6. If necessary, click Yes to continue.
7. Skip to Step 9 if the Specify Microsoft Excel Directory window doesn’t
appear. Otherwise, click Next to accept the default directory for
Microsoft Excel.
8. To disable the Microsoft Excel Data Exchange write option, click No in
response to the question:
Do you want Microsoft Excel Data Exchange to be allowed to write to a
ProcessLogix Server database?
IMPORTANT
In Step 5 below, you MUST NOT change the directory
names from their defaults. If you do change directory
names, the ProcessLogix system may not operate properly.
ATTENTION
!
We recommend that you answer No to the question:
Do you want Microsoft Excel Data Exchange to be allowed
to write to a ProcessLogix Server database?
If you answer Yes, the write option is enabled and it is
possible for anyone with access to the machine to write to
the Server database.