Rockwell Automation SP600 AC Drive User Manual Version 1.0 - Manual (Page 112)

9-14 SP600 AC Drive User Manual
The text above the function key will change to indicate the
command that will be issued when the key is pressed.
View Fault Queue: Displays the Fault Queue screen (see chapter
13). Press
to return to the process display screen.
Next: (Reserved for future use.)
!
ATTENTION: When switching from Auto to Manual
or Manual to Auto, the drive will ramp to the reference
level provided by the new source at the rate specified
in Accel Time 1 (140), Decel Time 1 (142), Accel
Time 2 (141), or Decel Time 2 (143). Be aware that
an abrupt speed change may occur depending upon
the new reference level and rate specified in these
parameters. Failure to observe this precaution could
result in bodily injury.
ESC/
PROG