Rockwell Automation SP600 AC Drive User Manual Version 1.0 - Manual (Page 259)

Troubleshooting the Drive 13-27
OIM Version
The OIM Version selection provides information on the OIM you are
using to access this data. See figures 13.11 and 13.12.
Device Items
The Device Items selection provides access to a list of diagnostic
parameters. These parameters should be adjusted by qualified
personnel only. See figure 13.13.
Figure 13.11 – Accessing the OIM Version Information
Diagnostics:
Status Info
OIM Version
Monitor Lang
P0: SP600
Stopped Auto
Main Menu
Diagnostics
Fault Info
Highlight Diagnostics icon
Highlight item
See
figure
12.11
>>
Figure 13.12 – OIM Version Screens at the Product and Component Levels
Diag: Prodct Ver
Date: mm/dd/yyyy
FW Ver: x.xxx
Series: X
Cmp
F1
F1
Diag: OIM Comp
Prev
LCD OIM Standard
Control Board
Prdt
Next
Flash
To Component
Level To Product
Level
F1 F3
Flash F/W
Information
Diag: Comp Ver
FW Ver: x.xxx
HW Ver: xxx
S#: xxxxxxxx
!
ATTENTION: The parameters in the Device Items
menu must be set by a qualified person who
understands the significance of setting them
accurately. Failure to observe this precaution could
result in bodily injury.
Figure 13.13 – Accessing the Device Item Information
Diagnostics:
Device Items
Fault Info
Monitor Lang
P0: SP600
Stopped Auto
Main Menu
Diagnostics
Status Infor
Highlight Diagnostics icon
Highlight item
Dev Item #
Param name
Param value
Dflt
Scroll through
items
F1 Display default
>>