Rockwell Automation SP600 AC Drive User Manual Version 1.0 - Manual (Page 114)

9-16 SP600 AC Drive User Manual
9.8.5 Selecting Reverse Video for the Process Display Screen
To select normal or reverse video for the process display screen,
select Display Video from the Display menu. See figure 9.14 for
sample screens.
Note that each OIM connected to the drive can have a different
display mode.
9.9 Controlling the Drive From the LCD OIM
When the OIM is the selected control source, it can be used to
control the drive:
• Start (Run)
• Stop
• Clear Faults
• Jog
• Select direction
Note that pressing two OIM keys at the same time will cause no
command to be sent to the drive. For example, attempting to
change direction while jogging from the same OIM will cause the
drive to stop.
Figure 9.14 – Selecting Reverse Video for the Process Display Screen
P0: SP600
Auto Stopped
Fltq
0.00 Volts
Amps
Hz
0.00
0.00
Luse1
Normal Video Reverse Video
P0: SP600
Auto Stopped
Fltq
0.00 Volts
Amps
Hz
0.00
0.00
Luse1
>> >>