Rockwell Automation SP600 AC Drive User Manual Version 1.0 - Manual (Page 13)

Introduction 1-1
C
HAPTER
1
Introduction
This manual is intended for qualified electrical personnel familiar
with installing, programming, and maintaining AC drives.
This manual contains information on:
• Installing and wiring the SP600 drive
• Programming the drive
• Troubleshooting the drive
The latest version of this manual is available from
http://www.reliance.com/literature/literature_main.html.
1.1 Manual Conventions
Parameter names: In most instances, parameter names are shown
as the parameter name followed by the parameter number. For
example: PI Control (125).
1.2 Getting Assistance from Reliance
Electric
If you have any questions or problems with the products described
in this instruction manual, contact your local Reliance Electric sales
office.
For technical assistance, call 1-864-284-5444. Before calling,
please review the troubleshooting section of this manual and check
the standard drives website for additional information. When you
call this number, you will be asked for the drive model number and
this instruction manual number. Also, please have your product
version number ready (refer to chapter 13).