Rockwell Automation SP600 AC Drive User Manual Version 1.0 - Manual (Page 198)

12-68 SP600 AC Drive User Manual
Captures and displays the Drive Status 1 bit pattern at the time of
the last fault. See parameter 209 for the bit descriptions.
Captures and displays the Drive Status 2 bit pattern at the time of
last fault. See parameter 210 for the bit descriptions.
227 Status 1 @ Fault
Range: See figure12.37
Default: Read Only
Access: 2 Path: Utility>Diagnostics
See also: 209, 224-230
Figure 12.37 – Status 1 @ Fault (227)
0 1 1 0 0 0 0 1 0 1 1 1 0 0 0 0
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Condition True
0 =Condition False
x =Reserved
Bit #
Ready Activ
e
Command Dir Actual Dir Acceler
ating
Deceler
ating
Alar
m
Faulted At Speed Local ID 0 Local ID 1 Local ID 2 Spd Ref ID 0 Spd Ref ID 1 Spd Ref ID 2 Spd Ref ID 3
Nibble 1 Nibble 2 Nibble 3 Nibble 4
228 Status 2 @ Fault
Range: See figure12.38
Default: Read Only
Access: 2 Path: Utility>Diagnostics
See also: 210, 224-230
Figure 12.38 – Status 2 @ Fault (228)
0 0 0 0 0 0 0 x 0 0 0 0 0 0 x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Condition True
0 =Condition False
x =Reserved
Bit #
Ready Active Running Jogging Stopping DC Braking AutoT
uning
AutoRst Ctdn AutoRst Act Curr Limit Bus Freq Reg Motor Overld DPI at 500 k
Nibble 1 Nibble 2 Nibble 3 Nibble 4