Rockwell Automation SP600 AC Drive User Manual Version 1.0 - Manual (Page 186)

12-56 SP600 AC Drive User Manual
Displays the present parameter access level. Refer to chapter 11 for
more information about parameter access levels.
Resets all parameter values to defaults (except parameters 196,
201, and 202). Option 1 resets the drive to factory settings. Options
2 and 3 reset the drive to alternate voltage and current ratings as
shown:
Low voltage class is typical European voltage ratings: volts,
frequency, power units.
High voltage class is typical U.S.A. voltage ratings: volts, frequency,
power units.
196 Param Access Lvl
Range: 0 = Basic
1 = Standard
2 = Advanced
Default: Read Only
Access: 0 Path: Utility>Drive Memory
See also:
197 Reset To Defalts
Range: 0 = Ready
1 = Factory
2 = Low Voltage
3 = High Voltage
Default: 0 = Ready
Access: 0 Path: Utility>Drive Memory
See also:
Class
Drive Voltage
230 460 600
Low Voltage 200 400 600
High Voltage 230 460 600