Rockwell Automation SP600 AC Drive User Manual Version 1.0 - Manual (Page 125)

Programming Basics 11-3
11.3 Accessing the Parameters
Important: See chapter 9 for information on modifying parameters
using the LCD OIM.
Parameters are programmed and viewed using the LCD OIM or VS
Utilities software.
The LCD OIM displays parameters by group, by individual
parameter number, and parameters that have changed from their
default value.
To access parameters using the LCD OIM, select the Parameters
icon from the main screen. See figure 11.2.
See instruction manual D2-3488 for information on accessing and
modifying parameters using VS Utilities software.
Figure 11.2 – Accessing the Parameters Using the LCD OIM
Stopped Auto
P0: SP600
Parameters:
Changed Params
P Numbers
By Group
File:
File 2 Name
File 3 Name
File 1 Name
Monitor Lang
Auto Stopped
Main Menu
Parameters
P0: SP600
Stopped Auto
P0: SP600
Parameters:
P Numbers
Changed Params
By Group
Stopped Auto
P0: SP600
Parameters:
P Numbers
By Group
Changed Params
Group:
Group 2 Name
Group 3 Name
Group 1 Name
Changed: Par
Searching. . .
Parameter #
Parameter Text
+456.78 Unit
1234
Dflt
Parameter #
Parameter Name
Val: Val
1234
ESC/
PROG
ESC/
PROG
ESC/
PROG
ESC/
PROG ESC/
PROG
ESC/
PROG
ESC/
PROG ESC/
PROG
>>
>>
>>
>>
Dft: Val