Rockwell Automation SP600 AC Drive User Manual Version 1.0 - Manual (Page 205)

Parameter Descriptions 12-75
Indicates inputs that are presently issuing a valid stop command.
Indicates the port that is supplying the manual mode speed
reference and control.
288 Stop Owner
Range: See figure 12.45
Default: Read Only
Access: 2 Path: Communication>Masks & Owners
See also: 276 - 285
Figure 12.45 – Stop Owner
x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Enabled
0 =Disabled
x =Reserved
Bit #
Factory Default Bit Values
Local OIM DPI P
or
t 2
Nibble 1 Nibble 2 Nibble 3 Nibble 4
x x
Ter
minal Blk
Reser
ved
Netw
or
k
DPI P
or
t 3
Reser
ved
x x x 0 0 0 0 0
Source Location
Terminal Blk 24V Logic I/O
DPI Port 1 Local OIM
DPI Port 2 DIN Port 1
1 Typically connected to remote OIMs.
DPI Port 3 Split DIN Port 1
DPI Port 5 Network
298 Manual Owner
Range: See figure 12.46
Default: Read Only
Access: 2 Path: Communication>Masks & Owners
See also:
Figure 12.46 – Manual Owner
0 0 0 0 x 0 x x x x x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 = Control is Enabled
0 = Control is Disabled
x =Reserved
Bit #
Factory Default Bit Values
Ter
minal Blk
Local OIM DPI P
or
t 2
DPI P
or
t 3
Reser
ved
Netw
or
k
Reser
ved
Nibble 1 Nibble 2 Nibble 3 Nibble 4