Rockwell Automation SP600 AC Drive User Manual Version 1.0 - Manual (Page 113)

Using the LCD OIM 9-15
9.8.3.1 Customizing the Function Key Label Text
You can customize the text for each function key label (up to five
characters). See figure 9.13.
9.8.4 Setting the Display Timeout Period
When the OIM is inactive (that is, no keys have been pressed) for a
user-specified period of time, the process display screen becomes
active. To return to the previously active screen, press any key. To
return to the Main Menu, press
.
To set the display timeout period, select Display Timeout from the
Display menu. The timeout period can range from 10 to 1200
seconds (20 minutes).
This feature can also be disabled by pressing the F1 key while in the
display time screen.
Note that each OIM connected to the drive can have a different
timeout period.
Figure 9.13 – Customizing the Function Key Label Text
Function List:
Load User Set 1
Load User Set 2
Undefined
Do You Wish to
Rename Function
States Text For:
Load User Set 1
Yes No
Function List
F2: Undefined
F3: Undefined
F1: Load User Set 1
ClrFK
Name State Text:
FKey Text
Luse A
A BCDEFGHIJKLM
Next
F1
F2
OIM will use default
F-Key label Luse1
Function List
F2: Undefined
F3: Undefined
F1: Load User Set 1
ClrFK
F4
OIM will use custom
F-Key label LuseA
Move through label text
Move through letters and
symbols
P0: SP600
Auto Stopped
Fltq
0.00 V olts
A m ps
Hz
0.00
0.00
Luse1
P0: SP600
Auto Stopped
Fltq
0.00 V olts
A m ps
Hz
0.00
0.00
LuseA
A->a Save
F3
Esc or timeout to
Process Display
screen
Esc or timeout to
Process Display
screen
From figure
B.9
Toggle between upper
and lower case
>>
>>
ESC/
PROG