Rockwell Automation SP600 AC Drive User Manual Version 1.0 - Manual (Page 210)

12-80 SP600 AC Drive User Manual
Enables/disables the square root function for each analog input.
This function is typically used when measuring the feedback for the
process control regulator. The square root function is scaled such
that the input range is the same as the output range. For example, if
the input is set up as a unipolar voltage input, then the input and
output ranges of the square root function will be 0 to 10 volts.
321 Anlg In Sqr Root
Range: See figure 12.50
Default: See figure 12.50
Access: 2 Path: Inputs & Outputs>Analog Inputs
See also:
Figure 12.50 – Anlg In Sqr Root (321)
0 x x 0 x x x x x x x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Enable
0 =Disable
x =Reserved
Bit #
Factory Default Bit Values
Analog In 1 Analog In 2
Nibble 1 Nibble 2 Nibble 3 Nibble 4