Stop indicator – Yaskawa iQpump Controller User Manual User Manual
Page 61
Advertising
3.3 Drive Mode Indicators
YASKAWA TM.iQp.06 iQpump Controller User Manual
61
◆ Stop Indicator
The status of the “STOP” indicator is shown in
when the iQpump drive is in either the “Hand” or “Auto” mode.
Table 3.6 STOP Indicator
Indicator Status
Condition
On
Drive is decelerating to a stop or stopped
Blinking
Drive is in a run condition but the frequency reference is zero or drive is running in “Auto” mode and OFF has been pressed
Off
Drive is running
Advertising